These fancy Victorian style door headers are designed for either interior or exterior use. All headers are sanded smooth, sealed with a good white primer and ready for your custom painting. ... the wood will not warp or lose it's shape over the years.
- INFORMATIONAL VIDEO ON OUR DOOR & WINDOW HEADERS -
36 inches long
1/2 inch thick manufactured wood $44.95
1 inch thick $48.95
SUPPORT BAR ADD $5.00
Dimensions: - 36 inches long by 3 3/4 inches high at the center. Shipped with coat of white primer and ready to paint.
32 inches long
1/2 inch thick manufactured wood $42.95
1 inch thick $46.95
SUPPORT BAR ADD $5.00
Dimensions: - 32 inches long by 3 3/4 inches high at the center. Shipped with coat of white primer and ready to paint.
36 inches long
1/2 inch thick manufactured wood $46.95
1 inch thick $48.95
SUPPORT BAR ADD $5.00
Dimensions: - 36 inches long by 7 1/8 inches high at the center. Shipped with coat of white primer and ready to paint.
36 inches long
1/2 inch thick manufactured wood $46.95
1 inch thick $48.95
SUPPORT BAR ADD $5.00
Dimensions: - 36 inches long by 6 inches high at the center. Shipped with coat of white primer and ready to paint.
36 inches long
1/2 inch thick manufactured wood $46.95
1 inch thick $48.95
SUPPORT BAR ADD $5.00
Dimensions: - 36 inches long by 6 inches high at the center. Shipped with coat of white primer and ready to paint.
36 inches long
1/2 inch thick manufactured wood $46.95
1 inch thick $46.95
SUPPORT BAR ADD $5.00
Dimensions: - 36 inches long by 7 1/4 inches high at the center. Shipped with coat of white primer and ready to paint.
36 inches long
1/2 inch thick manufactured wood $44.95
1 inch thick $46.95
SUPPORT BAR ADD $5.00
Dimensions: - 36 inches long by 5 1/4 inches high at the center. Shipped with coat of white primer and ready to paint.
Support Bars for Door / Window Headers
Most commonly customers wish to use the thicker Headers to hang upside down to use on a porch between their porch brackets...a "Bracket Buddy". We bevel a strip of wood and glue and nail the header then use caulking to seal the header to the strip. Support strips are 1 3/4 inches wide and add approximately three - four inches to the overall length of the piece. The ends are then pre drilled with a counter sunk hole for easy mounting.
All content (c) Victorian Design Woodshop - All rights Reserved - ABOUT